Complete official steroid recipes for oral injection steroid Muscle growth powder
Complete official steroid recipes for oral injection steroid Muscle growth powder
Buy steroid powders from ChinaWe can ship to worldwide with safe package..More details at
Email：alen@ok-biotech.com
Skype: live:alen_358
Mobile: +86 852 64872529
Www.ok-biotech.com
Steroid Recipes
We will present to you the best and most effective recipes for the most commonly used Steroids. You will notice that they are extremely simple - only three ingrediants each time; the Hormone powder, Benzyl-Benzoate and Benzyl Alcohol. It is the ratio of these three which is important.
What is Benzyl-Alcohol & Benzyl Benzoate and what do they do?
Benzyl- Benzoate is a solvent. This means solutes such as Hormone Powders dissolve easily in it, and that is the main purpose of its use in Steroids. The Benzyl-Benzoate is used to dissolve and suspend the Hormone Powder. If the correct amount of this solvent is not used the Hormone powder will 'undissolve' from the solution causing the Steroids to 'Crash' (get cloudy/less effective).
Some Hormone Powder dissolve more easily than others and therefore less Benzyl Benzoate is required. The fact that varying amount of the solvent are required for the Hormone Powders is why having this page as a resource is so vital.
Benzyl-Alcohol is just a form of alcohol. Its use in Steroids is to preserve the suspension for months, even years, without any reduction in sterility. Alcohol is an anti-bacterial disinfectant and is used as such in many industries. As aforementioned Benzyl-Alcohol ensures the Steroid maintains its sterility when used in the right concentration, however, if too much is used the Steroid will be painful to inject and will cause post injection soreness.
Offical list
These should be followed exactly, use electronic scales that are able to weight to 0.01g to ensure accuracy. You will see the abreiviations BA and BB being used in the following recipes. Benzyl Benzoate - BB / Benzyl Alcohol - BA.
Testosterone Enanthate
250mg/ml - 100ml
25 gram Testosterone Ethanate powder (18.75ml)
2ml BA (2%)
10ml BB (10%)
69.25ml Oil
250mg/ml - 100ml
25 gram Testosterone Ethanate powder (18.75ml)
2ml BA (2%)
10ml BB (10%)
69.25ml Oil
Testosterone Propionate
100mg/ml - 100ml
10 gram Testosterone Propionate powder (7.5ml)
2ml BA (2%)
20ml BB (20%)
70.5ml Oil
100mg/ml - 100ml
10 gram Testosterone Propionate powder (7.5ml)
2ml BA (2%)
20ml BB (20%)
70.5ml Oil
NPP
200mg /mL - 20ml
NPP powder - 4 Grams
100% EO - 12.6mL
2%BA - 0.4mL
20%BB - 4mL
200mg /mL - 20ml
NPP powder - 4 Grams
100% EO - 12.6mL
2%BA - 0.4mL
20%BB - 4mL
Tren Acetate
100mg/ml - 100ml
10 gram Trenbolone Acetate powder (7.5ml)
2ml BA (2%)
20ml BB (20%)
70.5ml Oil
100mg/ml - 100ml
10 gram Trenbolone Acetate powder (7.5ml)
2ml BA (2%)
20ml BB (20%)
70.5ml Oil
10 gram Trenbolone Enanthate powder
2mL BA (2%)
10mL BB (10%)
80.5mL Oil
2mL BA (2%)
10mL BB (10%)
80.5mL Oil
Masteron
100mg/ml - 250ml
25 gram masteron Propionate (20ml)
5ml BA (2%)
50ml BB (20%)
175ml Oil
100mg/ml - 250ml
25 gram masteron Propionate (20ml)
5ml BA (2%)
50ml BB (20%)
175ml Oil
Equipoise
100mg/ml - 100ml
10g Boldenone Acetate powder (7.5ml)
18% BB 18ml
2% BA 2ml
72.5ml Oil
100mg/ml - 100ml
10g Boldenone Acetate powder (7.5ml)
18% BB 18ml
2% BA 2ml
72.5ml Oil
Methenolone enanthate
250ml for 100mg/ml
25 grams Methenolone enanthate
176.25 ml Grapeseed Oil
5ml benzyl alcohol = 2%
50ml benzyl benzoate = 20%
250ml for 100mg/ml
25 grams Methenolone enanthate
176.25 ml Grapeseed Oil
5ml benzyl alcohol = 2%
50ml benzyl benzoate = 20%
Deca-Durabolin
250mg/ml - 250ml
Durabolin powder ： 50g (46.8ml)
Grapeseed oil: 124.4ml
BA 3.75ml (3%)
BB 75ml (15%)
250mg/ml - 250ml
Durabolin powder ： 50g (46.8ml)
Grapeseed oil: 124.4ml
BA 3.75ml (3%)
BB 75ml (15%)
Recipe for Sustanon 250mg/ml
100ml @ 250mg/ml:-
-78.75ml Grapeseed oil
-2.5ml BA (2.5%)
-7.5ml BB (7.5%)
-3g Testosterone Propionate
-6g Testosterone Phenylprop
-6g Testosterone Isocaproate
-10g Testosterone Decanoate
100ml @ 250mg/ml:-
-78.75ml Grapeseed oil
-2.5ml BA (2.5%)
-7.5ml BB (7.5%)
-3g Testosterone Propionate
-6g Testosterone Phenylprop
-6g Testosterone Isocaproate
-10g Testosterone Decanoate
The above recipes will produce high quality, highly stable and reliable Steroids every-time. To see the process being completed take a look at the Step By Step Process by clicking here.
LIQUID ORAL RECIPES - Please use the 'Steroid Calculator' page to learn how to make tablets/capsules
Anadrol:
Highest concentration made - 50mg/ml
Per 1 gram of Oxymetholone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol
Anavar:
Highest concentration made - 20mg/ml
Per 1 gram of Oxandrolone powder you will need:
9.8 ml's of PEG 300
39.2 ml's of 190 Proof Grain Alcohol
Armidex:
Highest concentration made - 5mg/ml
Per 1 gram of Anastrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol
Clomid:
Highest concentration made - 50mg/ml
Per 1 gram of Clomiphene Citrate you will need:
8.4 ml's of PEG 600
10.5 ml's 190 Proof Grain Alcohol
Dianabol:
Highest concentration made - 50mg/ml
Per 1 gram of Methandrostenolone powder you will need:
19 ml's of 190 Proof Grain Alcohol
No PEG needed. Follow the no PEG recipe.
Femara:
Highest concentration made - 5mg/ml
Per 1 gram of letrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol
Nolvadex:
Highest concentration made - 20mg/ml
Per 1 gram of Tamoxifen Citrate you will need:
9.8 ml's of PEG 600
39.2 ml's of 190 Proof Grain Alcohol
Proviron:
Highest concentration made - 50mg/ml
Per 1 gram of Mesterolone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol
Winstrol:
Highest concentration made - 25 mg/ml
Per 1 gram of Stanzolol you will need:
7.8 ml's of PEG 300
31.2 ml's of 190 Proof Grain Alcohol
---------------------------------------------------------------------------------
Solutions requiring PEG and 190 Proof Alcohol
Step 1. Prepare a hot water bath. Boil water in microwave or on a pot. Once boiling starts remove from heat.
Step 2. Place PEG and powder in beaker.
Step 3. Place the beaker deep enough in to the water so that the hot water is level with the PEG and powder. Gently swirl or stir with a stir rod until solution is clear. Reheat water as needed.
Step 4. Allow PEG to cool some. Then add in your 190 proof alcohol. You don't have to do this drop by drop but don't just dump it in. Pour it in slowly.
Step 5. Stir or gently shake until mixed.
For recipes that do not require PEG.
1. Mix powder and 190 proof alcohol.
2. Stir with stir rod or shake. Most powders that do not require PEG will disolve no problem. If heat is needed follow the instructions for heating powders that use PEG
Highest concentration made - 50mg/ml
Per 1 gram of Oxymetholone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol
Anavar:
Highest concentration made - 20mg/ml
Per 1 gram of Oxandrolone powder you will need:
9.8 ml's of PEG 300
39.2 ml's of 190 Proof Grain Alcohol
Armidex:
Highest concentration made - 5mg/ml
Per 1 gram of Anastrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol
Clomid:
Highest concentration made - 50mg/ml
Per 1 gram of Clomiphene Citrate you will need:
8.4 ml's of PEG 600
10.5 ml's 190 Proof Grain Alcohol
Dianabol:
Highest concentration made - 50mg/ml
Per 1 gram of Methandrostenolone powder you will need:
19 ml's of 190 Proof Grain Alcohol
No PEG needed. Follow the no PEG recipe.
Femara:
Highest concentration made - 5mg/ml
Per 1 gram of letrozole powder you will need:
19.9 ml's PEG 300
179.1 ml's of 190 Proof Grain Alcohol
Nolvadex:
Highest concentration made - 20mg/ml
Per 1 gram of Tamoxifen Citrate you will need:
9.8 ml's of PEG 600
39.2 ml's of 190 Proof Grain Alcohol
Proviron:
Highest concentration made - 50mg/ml
Per 1 gram of Mesterolone you will need:
8.4 ml's of PEG 300
10.5 ml's 190 Proof Grain Alcohol
Winstrol:
Highest concentration made - 25 mg/ml
Per 1 gram of Stanzolol you will need:
7.8 ml's of PEG 300
31.2 ml's of 190 Proof Grain Alcohol
---------------------------------------------------------------------------------
Solutions requiring PEG and 190 Proof Alcohol
Step 1. Prepare a hot water bath. Boil water in microwave or on a pot. Once boiling starts remove from heat.
Step 2. Place PEG and powder in beaker.
Step 3. Place the beaker deep enough in to the water so that the hot water is level with the PEG and powder. Gently swirl or stir with a stir rod until solution is clear. Reheat water as needed.
Step 4. Allow PEG to cool some. Then add in your 190 proof alcohol. You don't have to do this drop by drop but don't just dump it in. Pour it in slowly.
Step 5. Stir or gently shake until mixed.
For recipes that do not require PEG.
1. Mix powder and 190 proof alcohol.
2. Stir with stir rod or shake. Most powders that do not require PEG will disolve no problem. If heat is needed follow the instructions for heating powders that use PEG
Injectable Winstrol Suspension
How to make Winstrol Suspension @ 100mg/mL X 20mL in water.
-2 grams stanozolol powder X 0.75 displacement volume = 1.5mL
-24% BB = 4.8mL
-3% BA = 0.6mL
- 3% Polysorbate 80 = 0.6mL
-DISTILLED Water (ONLY use Distilled Water!) 12.5mL
Procedures:
-Combine stanozolol powder, BA, BB, PS80 and heat until clear while swirling.
-Filter slowly with a Sterile 0.22um Syringe Filter directly into a Sterile Vial.
- Filter the distilled water with a new Sterile 0.22um Syringe filter into the vial - Keep swirling the vial as you filter in the distilled water.
-Vigorously shake the Winstrol in the vial for a few minutes
Complete! You now have Winny @ 100mg/mL X 20mL.
NOTE: your final Winny solution will look foamy or airy. After you shake the hell out of it, let it sit untouched for 3 days. You will see it settle out with the water on top as usual. This will be very micronized and settling out will take days, so do not be concerned.
-2 grams stanozolol powder X 0.75 displacement volume = 1.5mL
-24% BB = 4.8mL
-3% BA = 0.6mL
- 3% Polysorbate 80 = 0.6mL
-DISTILLED Water (ONLY use Distilled Water!) 12.5mL
Procedures:
-Combine stanozolol powder, BA, BB, PS80 and heat until clear while swirling.
-Filter slowly with a Sterile 0.22um Syringe Filter directly into a Sterile Vial.
- Filter the distilled water with a new Sterile 0.22um Syringe filter into the vial - Keep swirling the vial as you filter in the distilled water.
-Vigorously shake the Winstrol in the vial for a few minutes
Complete! You now have Winny @ 100mg/mL X 20mL.
NOTE: your final Winny solution will look foamy or airy. After you shake the hell out of it, let it sit untouched for 3 days. You will see it settle out with the water on top as usual. This will be very micronized and settling out will take days, so do not be concerned.
This will produce the standard PIP of Winstrol found in Underground Labs, it is not totally painfree - but not painful.
Blends
Testosterone 600mg/mL Blend @ 20mL
Testosterone Enathate powder - 12g (displaces approx. 10.2ml ~ 51% total volume)
3%BA – 0.6mL
10%BB – 2mL
25%EO – 5mL
11% Oil – 2.2mL
Tren E 125mg / Mast E 125mg / Test E 125mg
Blend of 375mg/ml
Testosterone Enathate powder - 12g (displaces approx. 10.2ml ~ 51% total volume)
3%BA – 0.6mL
10%BB – 2mL
25%EO – 5mL
11% Oil – 2.2mL
Tren E 125mg / Mast E 125mg / Test E 125mg
Blend of 375mg/ml
10ml conversion
TrenE 1.25g (1.06ml)
MastE 1.25g (1.06ml)
TestE 1.25g (1.06ml)
3%BA (0.3ml)
30%BB (3ml)
Oil (3.6ml)
Tren E 250mg / Mast E 250mg
Blend of 500mg/ml
10ml conversion
TrenE 2.5g (2.125ml)
MastE 2.5g (2.125ml)
3%BA (0.3ml)
30%BB (3ml)
EO (1.5ml)
Oil (1ml)
评论
发表评论